| |
Built on Mifare 13.56 MHz Technology, these Time Attendance Readers can facilitate Attendance & Access Control in large, medium & small scale industries
Mifare Contact less Smart Card Reader with TCP/IP interface (SAM-II)
Technical Specifications: Card Reader (Mifare ISO 14443 Type A) |
| |
 |
|
Overview:
Simple to use device which can read Mifare cards with TCP/IP connectivity and having Static IP. Data transfer to the server by PUSH and PULL method. It has SNMP feature to monitor various parameters of the reader like the mains or battery operation and battery status with all alarm status. It has tamper alarm with two different inputs and two relay outputs. On board battery for RTC and data can be retained up to 2 years. Firmware can be loaded via Ethernet. |
|
| |
Specifications: |
| Display : |
2 line X 16 character Backlit LCD |
| Clock : |
24- hour time stamp of data transactions |
| Keypad : |
4 X 3 Keypad matrix for setting reader functions.
Easy to operate keypad |
| Indicators : |
Bi-color LED
RED: blinks every second
GREEN: Glows on valid card entry
RED: Link LED for Ethernet
Buzzer: Alarm indication |
| Memory : |
512KB flash for transaction storage |
| Self – Test : |
On-board setup, test and diagnostics |
| Interfaces : |
On Board TCP/IP Ethernet 10 Base T with RJ45
RS232 and RS485 |
| Digital Inputs : |
Two Inputs
1. Exit Switch
2. Fire Alarm |
| Digital output : |
Two Relay Outputs
1. Door
2. Door Open Alarm |
| Stack protocols : |
TCP, SNMP, ICMP, UDP, HTTP, POP3, TFTP, FTP,DHCP, SMTP |
| Operation Mode : |
Online and Offline |
| Shifts : |
8 shifts can be configured |
| Holiday : |
50 Holidays per year |
| Transaction Memory : |
38000 offline transaction storage. |
| Employee database : |
10000 Employee database ( Transaction memory And Employee database can be configured by user) |
| Power requirements : |
+8V to +16V DC (12V DC @ 250mA) |
| Frequency : |
13.56 MHz. |
| Read Distance : |
More than 60mm |
| Dimensions : |
L 120 mm X W 80 mm X H 41 mm |
| Weight : |
400g. |
|
| |
| Operating Specifications: |
Operating Temperature: -0° ~+50°
Storage Temperature: -10° ~ +60°
Humidity: 10~90 % relative |
| |
| Antenna Compatibility: |
| Built in |
| |
| Transponder Compatibility: |
ISO 14443A Mifare
MF1 1K & 4K, (Optional Ultralite, DESfire) |
| |
| Enclosure: |
| ABS |
| |
| |
| Mifare Contactless Smart Card Biometric Reader (SAM – BIO) |
| Technical Specifications: Card Reader (Mifare) |
| |
 |
|
Overview:
Simple to use device which can read Mifare cards with TCP/IP connectivity and having Static IP. Data transfer to the server by PUSH and PULL method. It has SNMP feature to monitor various parameters of the reader like the mains or battery operation and battery status with all alarm status. It has tamper alarm with two different inputs and two relay outputs. On board battery for RTC and data can be retained up to 2 years. Firmware can be loaded via Ethernet. Finger templates are stored in the reader memory. |
|
| |
| Application Usage Reads unique serial number and pre defined card data |
| |
| Specifications: |
| Same as Mifare Reader |
| Bio–Metric Sensor: |
Thin optical sensor. |
| Sensor Area: |
18 x 22 mm |
| Resolution: |
500 dpi, 256 gray scales |
| Authentication Time |
Authentication (1:1) timing less than 1 sec |
| Identification Time: |
Identification ( 1: 500 people ) timing 1.5 sec |
| FAR: |
Adjustable FAR from 1 % to 0.0000001 % |
| Algorithms: |
Morph Imaging™, MorphSoft™ Embedded |
| Database: |
Most common operations supported
Storage capacity 1000 templates. |
|
| |
| |
| Mifare Contact less Smart Card Reader with TCP/IP interface (SAM EX) |
| |
 |
|
Contact less Standard Smart Card Reader
Five relay outputs for connecting to external devices like Sirens or Hooters, locks/Turnstiles/Boom barriers
Five digital inputs for connecting to exit switch, fire alarm, door open sensor, mains available indication, battery low indication.
In reader specifications remains same as Mifare Reader. |
| In/Out Controller |
|
|
|
| |
| Technical Specifications of Smart Card Out reader: |
|
A power LED-Red indicates online status |
|
When smart card is swapped against the reader, Reader should send the information to IN reader and then the IN reader sends the information about access and accordingly door is opened if access is granted. |
|
The LED on the reader turns green if access is granted and make buzzer on |
|
If IN reader sends a FAIL signal, the OUT reader should blinks red LED thrice and play another fail tone. |
|
Power supply connection is taken from IN Reader. |
|
| |
| |
| PC based Canteen Management Reader ( SAM – MENU) |
| Specifications: |
 |
|
1. Contact less RFID Reader.
2. RS232 interface or 2 wires RS 485 or USB interface.
3. Dual LED for reader live indication
4. BUZZER for audio output.
5. 50-80 mm Mifare card operating range.
6. Card detection Time : <50ms
7. Card Read time: ~400ms for 700 bytes
8. The modules support Mifare ISO14443-A or ISO1443-B 1kB / 4Kb, cards.
9. Physical dimensions: 110 x 60 x 20 mm.
10. Desktop.
11. External 8-14V dc power (for non-USB).
12. Mounting Type: Table top
13. ABS Enclosure |
|
| |
| Note: Technical Specifications are subject to change without any prior intimation /notice) |
| |
 |
|
Technical Specifications: Card Reader (Mifare ISO 14443 Type A / ISO 15693 / ICODE 1)
Contact less Standard Smart Card Reader and Writer
Five relay outputs for connecting to external devices like Sirens or Hooters, locks/Turnstiles/Boom barriers.
Five digital inputs for connecting to exit switch, fire alarm, door open sensor, mains available indication, battery low indication.
All the specifications remain same as Mifare Reader. |
| Smart Card Reader with TCP/IP interface (SAM V) |
|
|
|
| |
